today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk 47″… you may have seen my evaluation on the uplift desk, if not …

In general, I should say I like the Flexispot E7.

here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.

It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you do not think me.

The electric raise/lower feature is not just easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a big fan of:

The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both excited (since this meant it was going to be durable) and also a little reluctant (since all of us understand how much of a challenge putting together furniture can be).

Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.

Is it worth getting a standing desk?

When assembled, I enjoy the smooth appearance of this desk. I’m positive any of the many varied surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.

The quiet operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as lot of times as you desire throughout the day.

This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.

 

because video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as near that as I might on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable grommets for travel through the outside container

for the desktop was not damaged in any way which is utterly strange because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had acquired this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up

an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but less expensive does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed too my prepare for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to check out their website also which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering different alternatives and accessories I might but I think I’m better that they only sent a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the move when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk 47″

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the extra money it’s gon na require to get into a higher end producer like uplift desk or really desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their credibility is excellent huge thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged but from a client perspective you ‘d probably be truly thrilled to get this in

today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk 47″”… you might have seen my review on the uplift desk, if not …

In general, I must state I like the Flexispot E7.

here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.

It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not think me, have a look at the video below of it operating while there’s a person lying down on it.

The electrical raise/lower feature is not only easy to use and fast, however it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:

The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how durable the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both excited (given that this implied it was going to be tough) and also a little reluctant (because all of us know how much of a difficulty putting together furniture can be).

Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.

Is it worth getting a standing desk?

When put together, I like the sleek look of this desk. I’m positive any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.

The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as sometimes as you want throughout the day.

This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.

 

in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near that as I might on uplifts site with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to know by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable television grommets for go through the outdoors carton

for the desktop was not damaged in any way which is utterly strange since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had bought this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up

an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best seems like a more affordable imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to have a look at their website as well which also feels eerily similar to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering various options and devices I could however I think I’m better that they just sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of bonus is the relocation when the core item isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk 47″”

in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and performance however I would spend the money it’s gon na take to enter a greater end producer like uplift desk or really desk and I have not personally used very desk products so I can’t speak on it but their track record is excellent big thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed however from a customer standpoint you ‘d probably be really delighted to get this in

today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk 47… you may have seen my evaluation on the uplift desk, if not …

In general, I must state I like the Flexispot E7.

here are a lot of things to like about the Flexispot E7. In general, my experience was extremely positive.

It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Inspect out the video listed below of it operating while there’s an individual lying down on it if you don’t think me.

The electric raise/lower feature is not just easy to use and quick, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a substantial fan of:

The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both thrilled (given that this indicated it was going to be tough) and also a little hesitant (because all of us understand just how much of an obstacle putting together furnishings can be).

Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the directions.

Is it worth getting a standing desk?

When assembled, I like the streamlined look of this desk. I’m confident any of the many varied finishes that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.

The quiet operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as sometimes as you want throughout the day.

Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.

 

because video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as close to that as I could on uplifts site with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you should know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for travel through the outside carton

for the desktop was not damaged in any way which is entirely strange because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough man if I had purchased this I ‘d have been on the phone with customer support instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any type of cable television management products whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up

an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however cheaper does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed too my plan for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at finest feels like a more affordable imitation of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their site as well which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our valuable time covering numerous choices and accessories I might but I think I’m better that they only sent a fundamental desk because as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of additionals is the relocation when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk 47

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the extra money it’s gon na require to get into a greater end maker like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it however their track record is excellent big thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d probably be actually delighted to get this in