Find Flexispot Standing Desk Converter, Extra Wide For More Room 2022

today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Converter, Extra Wide For More Room… you may have seen my evaluation on the uplift desk, if not …

In general, I need to say I like the Flexispot E7.

here are a lot of things to love about the Flexispot E7. In general, my experience was really favorable.

It’s very simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a great deal of weight. If you don’t think me, have a look at the video below of it running while there’s a person lying down on it.

The electric raise/lower function is not only easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are far more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:

The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both fired up (since this suggested it was going to be sturdy) and likewise a little hesitant (because all of us know just how much of a difficulty putting together furniture can be).

Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.

As soon as put together, I like the smooth look of this desk. I’m confident any of the many diverse surfaces that it is available in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.

The quiet operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as often times as you want throughout the day.

This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.

 

in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near to that as I might on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for go through the outside container

for the desktop was not damaged in any way which is entirely unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had actually acquired this I ‘d have been on the phone with customer support instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely definitely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage double motor which presses the expense of the desk up

an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when

this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best seems like a less expensive replica of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their site too which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering different choices and accessories I could however I think I’m happier that they only sent a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of bonus is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Standing Desk Converter, Extra Wide For More Room

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the money it’s gon na take to enter into a greater end manufacturer like uplift desk or very desk and I have not personally used very desk products so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a client viewpoint you ‘d most likely be actually delighted to get this in

Published