today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Dual Motor… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not only easy to use and quickly, however it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The hassle-free cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this suggested it was going to be sturdy) and also a little reluctant (because we all understand how much of a difficulty assembling furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as put together, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as sometimes as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as near to that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you must know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had purchased this I ‘d have been on the phone with customer service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed too my prepare for this desk at this point is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest seems like a cheaper imitation of that it simply does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to check out their site as well which also feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous options and accessories I might but I think I’m happier that they just sent out a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of bonus is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk Dual Motor
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance but I would spend the additional money it’s gon na require to enter a higher end maker like uplift desk or really desk and I haven’t personally used very desk items so I can’t speak on it but their reputation is great big thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed however from a customer viewpoint you ‘d probably be actually thrilled to get this in