today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk E1… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Inspect out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower feature is not just easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The practical cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this meant it was going to be sturdy) and likewise a little reluctant (since we all understand just how much of a difficulty putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined look of this desk. I’m positive any of the many diverse surfaces that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I might on uplifts site with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had bought this I ‘d have been on the phone with customer service right away they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any type of cable management materials whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the double stage dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed too my prepare for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a less expensive replica of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their website as well which also feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering different options and devices I could but I believe I’m happier that they just sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of additionals is the relocation when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk E1
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the money it’s gon na require to get into a greater end manufacturer like uplift desk or really desk and I have not personally used very desk items so I can’t speak on it but their credibility is excellent huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a customer perspective you ‘d most likely be actually thrilled to get this in