today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk E9… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and fast, however it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are far more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how tough the Flexispot is.
The hassle-free cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this indicated it was going to be strong) and likewise a little reluctant (because all of us know just how much of an obstacle assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the sleek appearance of this desk. I’m positive any of the many diverse finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as lot of times as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or wish to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you need to know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable grommets for go through the outdoors container
for the desktop was not harmed in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough male if I had bought this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor dual phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed also my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at best seems like a less expensive imitation of that it simply doesn’t feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to check out their website also which likewise feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering numerous options and devices I might but I believe I’m happier that they only sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a bunch of additionals is the move when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Standing Desk E9
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity but I would spend the money it’s gon na take to enter into a higher end producer like uplift desk or extremely desk and I have not personally used really desk products so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed but from a customer standpoint you ‘d most likely be truly thrilled to get this in