today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Eg1… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you do not believe me, have a look at the video below of it running while there’s a person lying down on it.
The electrical raise/lower feature is not just easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (because this suggested it was going to be tough) and likewise a little reluctant (because all of us understand how much of a difficulty putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
Once put together, I like the streamlined look of this desk. I’m positive any of the many varied surfaces that it can be found in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as many times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I could on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is entirely unusual since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had actually bought this I ‘d have been on the phone with client service right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually definitely where any type of cable management products whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the dual stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed too my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at best seems like a less expensive replica of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site too which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering numerous alternatives and devices I could but I think I’m happier that they only sent a basic desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk Eg1
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and performance however I would invest the money it’s gon na require to enter into a higher end manufacturer like uplift desk or very desk and I haven’t personally used extremely desk products so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters got here damaged however from a customer viewpoint you ‘d most likely be actually excited to get this in