today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk M2B… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Examine out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quick, but it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much thought.
On top of being practical, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are even more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how durable the Flexispot is.
The convenient cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this implied it was going to be sturdy) and likewise a little reluctant (due to the fact that we all know just how much of an obstacle putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I enjoy the streamlined look of this desk. I’m confident any of the many varied finishes that it is available in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as many times as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or want to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near to that as I might on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get lacking even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is entirely strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had actually acquired this I ‘d have been on the phone with customer support immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely absolutely where any type of cable television management materials whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed also my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best feels like a cheaper replica of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to take a look at their website too which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering numerous options and accessories I could however I think I’m better that they just sent a basic desk since as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of bonus is the move when the core item isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Standing Desk M2B
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity however I would spend the additional money it’s gon na require to enter into a greater end maker like uplift desk or really desk and I have not personally utilized really desk products so I can’t speak on it however their track record is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed however from a customer viewpoint you ‘d most likely be truly excited to get this in