today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Mat… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. If you do not believe me, take a look at the video below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not only easy to use and quick, but it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise useful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how strong the Flexispot is.
The practical cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (given that this suggested it was going to be durable) and also a little hesitant (due to the fact that we all know just how much of a challenge assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
When put together, I like the smooth appearance of this desk. I’m positive any of the many varied surfaces that it can be found in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as many times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I could on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you must know by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not harmed in any way which is entirely unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had actually purchased this I ‘d have been on the phone with customer support instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper does not indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed also my prepare for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive replica of that it just does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which likewise feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering numerous choices and devices I might but I believe I’m better that they only sent out a standard desk because as a basic desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a bunch of extras is the move when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk Mat
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the extra money it’s gon na require to enter into a greater end manufacturer like uplift desk or very desk and I haven’t personally used extremely desk products so I can’t speak on it but their reputation is very good big thanks to flexi area for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a customer perspective you ‘d probably be truly delighted to get this in