today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk South Africa… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s very durable and can hold a great deal of weight. If you do not think me, have a look at the video listed below of it operating while there’s an individual lying down on it.
The electric raise/lower feature is not only easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this suggested it was going to be tough) and likewise a little hesitant (due to the fact that all of us know how much of an obstacle putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the smooth look of this desk. I’m confident any of the many varied finishes that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as many times as you desire throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I might on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you must know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable grommets for pass through the outside carton
for the desktop was not damaged in any way which is absolutely strange because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had actually acquired this I ‘d have been on the phone with customer service instantly they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely absolutely where any kind of cable management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come standard with the control panel that permits up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed too my plan for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a more affordable imitation of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to check out their site as well which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering various choices and accessories I could however I think I’m happier that they just sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of extras is the move when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Standing Desk South Africa
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance however I would invest the extra money it’s gon na require to enter into a higher end producer like uplift desk or really desk and I haven’t personally utilized really desk products so I can’t speak on it but their credibility is excellent big thanks to flexi area for sending this out for review unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a client viewpoint you ‘d most likely be really thrilled to get this in