today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Transmission Rod… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. If you don’t believe me, check out the video below of it running while there’s a person lying down on it.
The electrical raise/lower function is not just easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how durable the Flexispot is.
The practical cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (since this suggested it was going to be strong) and likewise a little reluctant (because we all understand just how much of an obstacle putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When put together, I love the sleek appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as many times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near to that as I could on uplifts site with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for travel through the outside container
for the desktop was not damaged in any way which is utterly unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough male if I had purchased this I ‘d have been on the phone with customer support instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a cheaper replica of that it just does not feel quality and the difference in between this desk and my main desk is night and day do feel free to take a look at their site too which likewise feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering different options and devices I might however I think I’m better that they just sent a standard desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of extras is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk Transmission Rod
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and performance but I would spend the extra money it’s gon na take to enter into a higher end manufacturer like uplift desk or really desk and I have not personally used really desk items so I can’t speak on it but their reputation is very good big thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d most likely be truly delighted to get this in