today we’re having a look at a motorized sit-stand desk…Flexispot Theodore Standing Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. Inspect out the video below of it running while there’s a person lying down on it if you don’t think me.
The electric raise/lower function is not only easy to use and quickly, but it’s also remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are much more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how strong the Flexispot is.
The convenient cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (considering that this implied it was going to be tough) and likewise a little reluctant (due to the fact that we all understand just how much of a challenge assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the sleek appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as often times as you desire throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite fundamental I attempted to get as near to that as I might on uplifts site with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you should know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had purchased this I ‘d have been on the phone with client service right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest seems like a less expensive replica of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to check out their site also which also feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering different alternatives and devices I might but I think I’m happier that they just sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a lot of bonus is the move when the core product isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Theodore Standing Desk
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and performance but I would spend the extra money it’s gon na take to enter a greater end producer like uplift desk or really desk and I haven’t personally used very desk products so I can’t speak on it but their reputation is great big thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed however from a customer perspective you ‘d probably be actually delighted to get this in