today we’re taking a look at a motorized sit-stand desk…Flexispot Tischgestell Höhenverstellbar E8… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. If you don’t believe me, have a look at the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower function is not only easy to use and fast, however it’s also remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how durable the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (given that this meant it was going to be durable) and likewise a little hesitant (because all of us know how much of an obstacle assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth look of this desk. I’m confident any of the many diverse finishes that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite standard I attempted to get as close to that as I could on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you should know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had bought this I ‘d have been on the phone with customer service instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my plan for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at finest seems like a more affordable imitation of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to check out their website too which likewise feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering numerous options and accessories I could but I think I’m better that they just sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of bonus is the move when the core product isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Tischgestell Höhenverstellbar E8
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the extra money it’s gon na take to enter into a higher end maker like uplift desk or really desk and I have not personally used extremely desk products so I can’t speak on it but their reputation is excellent big thanks to flexi area for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged but from a client viewpoint you ‘d probably be actually excited to get this in