today we’re taking a look at a motorized sit-stand desk…Flexispot Usa… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a great deal of weight. Inspect out the video below of it operating while there’s a person lying down on it if you don’t think me.
The electrical raise/lower feature is not only easy to use and quickly, but it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much idea.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how durable the Flexispot is.
The practical cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (because this suggested it was going to be sturdy) and likewise a little hesitant (because all of us understand how much of an obstacle putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the sleek appearance of this desk. I’m confident any of the many varied surfaces that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as often times as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as close to that as I might on uplifts website with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you should understand by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had actually bought this I ‘d have been on the phone with customer service immediately they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes standard with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged too my prepare for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a more affordable imitation of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to check out their site also which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our valuable time covering various alternatives and devices I might however I believe I’m better that they only sent out a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a lot of extras is the relocation when the core product isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Usa
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the extra money it’s gon na take to get into a greater end producer like uplift desk or really desk and I have not personally utilized really desk items so I can’t speak on it but their reputation is excellent big thanks to flexi area for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed however from a customer viewpoint you ‘d probably be truly excited to get this in