today we’re taking a look at a motorized sit-stand desk…Flexispot Versand… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Examine out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quick, but it’s likewise remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much thought.
On top of being practical, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also useful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are far more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how strong the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (given that this meant it was going to be strong) and likewise a little reluctant (due to the fact that we all understand how much of an obstacle assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I like the smooth appearance of this desk. I’m positive any of the many varied surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or want to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as near that as I might on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you need to know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough guy if I had actually bought this I ‘d have been on the phone with customer support right away they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually definitely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed also my prepare for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a more affordable replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various alternatives and accessories I could but I think I’m better that they only sent a basic desk because as a standard desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of bonus is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Versand
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the money it’s gon na take to enter into a higher end producer like uplift desk or really desk and I have not personally utilized extremely desk items so I can’t speak on it however their reputation is great big thanks to flexi area for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters got here damaged but from a customer viewpoint you ‘d most likely be truly thrilled to get this in