Find Flexispot Vici Ef1 2 Tier Standing Desk 2022

today we’re having a look at a motorized sit-stand desk…Flexispot Vici Ef1 2 Tier Standing Desk… you may have seen my review on the uplift desk, if not …

In general, I must state I like the Flexispot E7.

here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.

It’s very simple to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you don’t believe me, take a look at the video listed below of it operating while there’s a person lying down on it.

The electric raise/lower function is not just easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:

The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both excited (since this meant it was going to be sturdy) and also a little reluctant (since we all know just how much of an obstacle assembling furnishings can be).

Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.

Once put together, I enjoy the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.

The quiet operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as lot of times as you want throughout the day.

This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.

 

because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you must know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outside container

for the desktop was not harmed in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough male if I had actually acquired this I ‘d have been on the phone with client service instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any sort of cable television management materials whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage double motor which presses the cost of the desk up

an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control panel that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a cost would be the one benefit I would offer this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed also my plan for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at finest feels like a less expensive imitation of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to check out their website too which likewise feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering various alternatives and devices I could but I believe I’m happier that they only sent a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of bonus is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Vici Ef1 2 Tier Standing Desk

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and productivity but I would invest the extra money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I have not personally utilized extremely desk items so I can’t speak on it but their track record is great big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters got here harmed but from a customer viewpoint you ‘d probably be really excited to get this in

Published