today we’re taking a look at a motorized sit-stand desk…Flexispot Vs Bekant… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a great deal of weight. Inspect out the video listed below of it running while there’s an individual lying down on it if you don’t think me.
The electric raise/lower function is not only easy to use and quick, but it’s likewise remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are far more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this suggested it was going to be strong) and likewise a little hesitant (due to the fact that all of us understand just how much of a difficulty putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When assembled, I like the streamlined appearance of this desk. I’m positive any of the many diverse finishes that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I might on uplifts site with similar configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you should understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for pass through the outdoors container
for the desktop was not damaged in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough man if I had purchased this I ‘d have been on the phone with customer support instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually definitely where any sort of cable management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my prepare for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to check out their website too which also feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering numerous options and accessories I might however I think I’m happier that they just sent a standard desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the move when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Vs Bekant
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and performance however I would spend the extra money it’s gon na take to enter into a greater end producer like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it however their reputation is great big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed however from a client viewpoint you ‘d probably be really excited to get this in