today we’re having a look at a motorized sit-stand desk…Flexispot Vs Maidesite… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Check out the video listed below of it running while there’s a person lying down on it if you do not think me.
The electrical raise/lower feature is not just easy to use and quick, but it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are far more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how durable the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this implied it was going to be strong) and likewise a little hesitant (because we all understand how much of an obstacle assembling furniture can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I like the streamlined appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as near that as I might on uplifts website with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you ought to know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is absolutely bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had actually bought this I ‘d have been on the phone with customer service right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my plan for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at finest feels like a less expensive replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to have a look at their site too which likewise feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering various choices and devices I might but I believe I’m happier that they just sent a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Vs Maidesite
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and performance however I would invest the extra money it’s gon na take to get into a greater end maker like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it but their reputation is excellent big thanks to flexi spot for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged but from a customer perspective you ‘d most likely be actually thrilled to get this in