today we’re taking a look at a motorized sit-stand desk…Flexispot White Standing Desk Adjustable Height Desk… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. If you do not believe me, check out the video below of it running while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and fast, however it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The convenient cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this suggested it was going to be tough) and also a little reluctant (because we all know just how much of an obstacle putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I like the smooth appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as many times as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as close to that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you need to know by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had bought this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed too my plan for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their website also which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering different alternatives and accessories I could but I think I’m better that they just sent a standard desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of bonus is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot White Standing Desk Adjustable Height Desk
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and efficiency but I would invest the additional money it’s gon na require to enter into a higher end producer like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it but their reputation is very good huge thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged however from a client standpoint you ‘d most likely be truly thrilled to get this in