today we’re taking a look at a motorized sit-stand desk…”””Hc-mura”” Discount Code Flexispot”… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you don’t think me, take a look at the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not just easy to use and quick, but it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being practical, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (since this meant it was going to be durable) and likewise a little hesitant (due to the fact that all of us understand how much of a difficulty assembling furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the sleek appearance of this desk. I’m confident any of the many varied finishes that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as many times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near to that as I could on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you ought to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough male if I had acquired this I ‘d have been on the phone with customer service right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any kind of cable management products whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the dual stage dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is definitely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged as well my prepare for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at best feels like a cheaper imitation of that it simply does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their site too which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering different choices and accessories I could but I think I’m happier that they just sent a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is five years and uplift desk is 7 years if you are “””Hc-mura”” Discount Code Flexispot”
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity however I would invest the extra money it’s gon na require to enter a greater end producer like uplift desk or very desk and I haven’t personally utilized very desk products so I can’t speak on it but their track record is excellent big thanks to flexi spot for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed however from a consumer standpoint you ‘d most likely be really thrilled to get this in