today we’re taking a look at a motorized sit-stand desk…Locktec Flexispot Livermore… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. If you do not think me, check out the video below of it running while there’s a person lying down on it.
The electric raise/lower function is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this meant it was going to be sturdy) and likewise a little reluctant (due to the fact that we all understand just how much of a difficulty assembling furniture can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I enjoy the smooth look of this desk. I’m positive any of the many diverse surfaces that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as many times as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you must understand by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough male if I had actually acquired this I ‘d have been on the phone with customer service right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely absolutely where any type of cable management materials whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the dual stage dual motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed also my plan for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest feels like a more affordable replica of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their website also which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering different choices and devices I might but I think I’m better that they just sent out a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of extras is the move when the core item isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Locktec Flexispot Livermore
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the additional money it’s gon na take to enter into a higher end producer like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it however their track record is excellent huge thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a consumer standpoint you ‘d probably be really thrilled to get this in