today we’re taking a look at a motorized sit-stand desk…Loctek Flexispot V9 Desk Exercise Bike… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t think me.
The electric raise/lower function is not only easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being practical, it also looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also useful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how strong the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this implied it was going to be sturdy) and also a little hesitant (due to the fact that all of us know how much of a difficulty assembling furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied finishes that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you need to understand by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had acquired this I ‘d have been on the phone with customer support instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely absolutely where any type of cable management products whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the dual stage double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come standard with the control board that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but more affordable does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed also my plan for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at best seems like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their website too which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering numerous options and devices I could however I think I’m happier that they only sent a standard desk since as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of additionals is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Loctek Flexispot V9 Desk Exercise Bike
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the extra money it’s gon na take to enter into a greater end maker like uplift desk or very desk and I have not personally utilized extremely desk items so I can’t speak on it however their reputation is very good big thanks to flexi spot for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed however from a client perspective you ‘d probably be truly thrilled to get this in