today we’re having a look at a motorized sit-stand desk…Loctek Flexispot… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s very tough and can hold a lot of weight. If you don’t think me, have a look at the video listed below of it running while there’s an individual lying down on it.
The electric raise/lower feature is not only easy to use and fast, but it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being functional, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how durable the Flexispot is.
The hassle-free cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (considering that this meant it was going to be durable) and also a little reluctant (since all of us understand how much of a difficulty putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When assembled, I love the sleek look of this desk. I’m positive any of the many varied surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as often times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or wish to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is absolutely unusual since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had bought this I ‘d have been on the phone with customer service immediately they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the double phase dual motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control panel that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at best seems like a less expensive replica of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website as well which likewise feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering numerous choices and accessories I could but I think I’m happier that they just sent out a basic desk because as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of bonus is the move when the core product isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Loctek Flexispot
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the money it’s gon na take to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized really desk products so I can’t speak on it but their reputation is excellent huge thanks to flexi area for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed however from a customer perspective you ‘d most likely be really excited to get this in