today we’re having a look at a motorized sit-stand desk…M4 Flexispot… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to put together, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. If you do not believe me, have a look at the video listed below of it running while there’s an individual lying down on it.
The electric raise/lower function is not only easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are far more cost effective than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The practical cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this suggested it was going to be durable) and likewise a little hesitant (because we all know how much of a challenge putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as many times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty basic I tried to get as near that as I could on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is entirely strange because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough male if I had actually purchased this I ‘d have been on the phone with customer support right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function unusually absolutely where any type of cable management materials whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double stage dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one benefit I would give this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed as well my prepare for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their website too which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering different options and devices I might but I believe I’m better that they only sent out a standard desk because as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of bonus is the move when the core product isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is seven years if you are M4 Flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance however I would invest the money it’s gon na require to enter into a higher end manufacturer like uplift desk or very desk and I have not personally utilized extremely desk products so I can’t speak on it however their credibility is great big thanks to flexi area for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed however from a client standpoint you ‘d probably be really thrilled to get this in