today we’re taking a look at a motorized sit-stand desk…Rakuten Flexispot… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to put together, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s very tough and can hold a lot of weight. Examine out the video below of it running while there’s a person lying down on it if you do not think me.
The electrical raise/lower feature is not only easy to use and quick, however it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much thought.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also handy if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are far more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The hassle-free cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this meant it was going to be durable) and also a little hesitant (due to the fact that all of us know just how much of a difficulty putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I enjoy the smooth look of this desk. I’m confident any of the many varied finishes that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as often times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near that as I could on uplifts site with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had actually acquired this I ‘d have been on the phone with customer service instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my plan for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at finest seems like a more affordable imitation of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their site also which likewise feels eerily comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering numerous alternatives and accessories I might but I believe I’m better that they just sent a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of bonus is the relocation when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Rakuten Flexispot
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and performance however I would invest the additional money it’s gon na require to enter a greater end producer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed but from a consumer viewpoint you ‘d probably be really delighted to get this in