today we’re having a look at a motorized sit-stand desk…Sit2Go Flexispot… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s extremely simple to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s very durable and can hold a great deal of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower function is not only easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more economical than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (because this implied it was going to be durable) and also a little reluctant (because we all understand just how much of a challenge putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth look of this desk. I’m confident any of the many diverse finishes that it is available in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as often times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I might on uplifts website with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you ought to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is absolutely bizarre because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough man if I had actually purchased this I ‘d have been on the phone with client service immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly definitely where any sort of cable management materials whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control board that allows for up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive does not mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is absolutely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my plan for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best feels like a less expensive replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to check out their site too which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering numerous choices and accessories I might but I think I’m happier that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of additionals is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is 7 years if you are Sit2Go Flexispot
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the additional money it’s gon na take to enter a greater end maker like uplift desk or very desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their credibility is very good big thanks to flexi spot for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here harmed but from a consumer standpoint you ‘d probably be actually delighted to get this in