today we’re taking a look at a motorized sit-stand desk…Standing Desk Converter Flexispot… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Inspect out the video listed below of it running while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower feature is not only easy to use and quickly, but it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how durable the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this indicated it was going to be sturdy) and likewise a little reluctant (because we all know how much of a challenge putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I like the streamlined look of this desk. I’m confident any of the many varied finishes that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or want to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as near that as I might on uplifts site with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you must know by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is entirely unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough man if I had actually purchased this I ‘d have been on the phone with customer service right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift however more affordable doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged too my plan for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at finest feels like a less expensive imitation of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their site too which likewise feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering various choices and devices I could however I believe I’m better that they only sent a standard desk since as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is seven years if you are Standing Desk Converter Flexispot
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the extra money it’s gon na take to enter into a higher end maker like uplift desk or extremely desk and I haven’t personally utilized very desk products so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d most likely be truly thrilled to get this in