today we’re taking a look at a motorized sit-stand desk…Standing Desk Flexispot Review… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video below of it running while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much idea.
On top of being functional, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how tough the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (since this indicated it was going to be strong) and also a little reluctant (because we all understand how much of a difficulty assembling furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the smooth look of this desk. I’m positive any of the many varied surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I tried to get as close to that as I might on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you ought to understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had actually acquired this I ‘d have been on the phone with customer support right away they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a more affordable replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their website also which likewise feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various options and devices I might however I believe I’m happier that they only sent out a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of additionals is the move when the core item isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is 7 years if you are Standing Desk Flexispot Review
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the money it’s gon na take to enter into a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized very desk products so I can’t speak on it however their reputation is great huge thanks to flexi area for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed however from a client standpoint you ‘d probably be truly thrilled to get this in