today we’re taking a look at a motorized sit-stand desk…Tischplatte F√ºR Flexispot… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you do not believe me, have a look at the video listed below of it operating while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and fast, however it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The hassle-free cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (considering that this meant it was going to be tough) and likewise a little reluctant (since we all understand just how much of an obstacle putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I like the streamlined appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I might on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for travel through the outdoors container
for the desktop was not harmed in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had actually purchased this I ‘d have been on the phone with customer service immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any kind of cable management products whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double stage double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come standard with the control panel that allows for up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however more affordable doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged as well my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at best seems like a more affordable replica of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their site also which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering different alternatives and devices I might however I believe I’m happier that they just sent a standard desk because as a basic desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of extras is the move when the core product isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Tischplatte F√ºR Flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance however I would spend the additional money it’s gon na take to enter a higher end manufacturer like uplift desk or really desk and I haven’t personally utilized really desk items so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters got here harmed however from a client standpoint you ‘d most likely be actually thrilled to get this in